News
Important Installations
Products
Are you an:
Architect
Dealer
Home Systems Installer
Contact Us
Home
Does your lifestyle call for the soft glow of a light filtering fabric? Complete the automation in your home or business with cellular/pleated skylight systems. The new Sky Control™ DS-100 system lets you motorize up to 80 square feet of window. The Sky Control™ DS-100 is a low voltage DC motor system, which means the wiring is a snap for almost anyone. The Sky Control™ DS-100 also has many control options which give customers considerable flexibility, from switch to IR, to integration with complete AV or home control systems. The Sky Control™ DS-100 is suited for standard cell (single and double) and pleated shades, as well as blackout materials. It accepts just about any manufacturer's cellular or pleated fabric in 3/8" or 3/4" sizes. Just call our factory for parameters and route hole information.
 
Features
  • Great for skylights and hard to reach windows.
  • Available for cellular and pleated fabrics.
  • Fabric stacks at the top or the bottom.
  • Aluminum frame snaps together.
  • Clip-in-place installation.
  • Fully assembled and adjusted prior to installation.
  • No electrician necessary.
  • Low voltage wire provided with order.
  • Extruded aluminum rail available in white.
  • 12 Volt DC motor and power supply.
  • Patented constant-tension cording method.
  • Rectangular openings at any angle: sloped, flat, vertical or side to side.
 
Parameters
  • Lightweight single cell fabric = 80 sq. ft. maximum
  • Double cell and blackout fabric = 50 sq. ft. maximum
  • Stack bottom or side to side = 35 sq. ft. maximum
  • Maximum width = 96”
  • Minimum width = 12”
  • Minimum depth for flush mount = 2”
  • Stationary support cords required:
    Cellular fabric widths over 48”
    Pleated fabric widths over 18”
    2 cords if over 72"
    3 cords if over 84"
 
Measuring & Ordering
Inside Mount (IB)
Measure window width and height in three places. Round up to the closest 1/8”. Order the narrowest width and shortest height. The compressible seal will take up a 1/2” variation.
Outside Mount (OB) or
Side to Side Mount (SS)
 Measure the desired width and height of the shade, allowing for moldings or obstructions.
 

Wiring Diagrams
Adobe Acrobat Reader is required for viewing the PDF files.
If you do not have Acrobat Reader download the free software now.
 
Single Shade (sglshade.pdf - 24KB)
Multiple Shades (multisha.pdf - 28KB)
Two shades with remote (2shawrem.pdf - 28KB)
Four shades with remote (4shawrem.pdf - 36KB)
Back to the top