| Section
221 - Sky Control™ 5066 |
Part
1 - General
|
| 1.01 |
Abstract:
|
|
A.
|
Scope
of work is to provide engineered shading systems with tracks
that may be built to precise specifications for straight,
horizontal, or inclined skylight openings, as well as for
customized curved atriums, barrel vaults, and greenhouse facades
that are operated by BTX motorized traverse system along with,
accessories, attachment hardware, and equipment necessary
to complete satisfactory installation. |
| 1.02 |
Submittals:
|
|
A. |
Manufacturing
literature to describe assembly, materials, installation instructions,
and specific data. Include any pertinent wiring diagrams.
|
|
B. |
Shop
drawings are to include but are not limited to, all components,
fasteners, and installation methods. |
|
C. |
Window
systems are custom-built based on measurements taken in the
field. |
| 1.03 |
Quality
Assurance: |
|
A.
|
Manufacturer's
Qualification |
|
|
1. |
BTX
Window Automation is the original manufacturer of a unique
line of motorized headrail systems, electronic shading devices
and controls. |
|
B. |
A
qualified installer or sub-contractor shall perform installation.
|
|
C. |
Installation
shall conform to Local and National Building Code and any
applicable local standards. |
|
D. |
Sample
system may be provided upon Architect's request and BTX authorization.
|
| 1.04 |
Delivery,
Storage and Handling: |
|
A.
|
Systems
to be delivered to installation site or to installer intact
in original manufacturer's custom-built containers. |
|
B. |
Systems
shall be operated under normal room temperature range, humidity,
and operating conditions. |
| 1.05 |
Warranty:
|
|
A. |
Provide
BTX standard limited warranty of five (5) years from
date of shipment against defects in materials and workmanship
of motors and hardware. Electronic and electrical controls
are warranted against defects in materials and workmanship
for two (2) years from date of shipment from the factory.
|
Part
2 - Products
|
| 2.01 |
Manufacturer:
|
|
A.
|
BTX
Window Automation
10827 Alder Circle
Dallas, TX 75238 USA
(800) 422-8839 |
| 2.02
|
Components:
|
|
A. |
Motors
shall be synchronous planetary drive with quick-connect coupling
for instant attachment to headrail. The 30 watt motor shall
be rated for up to 70 lbs. drapery weight and the 45 watt
motor shall be rated for up to 140 lbs. drapery weight. Motor
shall operate at constant speed regardless of load. Motors
shall be either 110v/60Hz or 220v/50Hz and are UL
and CSA recognized. Motors shall have shock resistant motor
coils and are moisture resistant and fire resistant. Motors
shall also have thermal protector for automatic switch off
to prevent overheating. Each tandem motor shall consist of
a primary and a secondary motor. Each primary motor shall
be provided with internal limit switches protected by a security
cover. The limit switches shall regulate the automatic switch
off upon completion of each running cycle. |
|
B.
|
Drive
Assembly and Return Assembly shall be manufactured from injection
molded plastic. |
|
C.
|
Headrail
shall be manufactured from extruded aluminum 1-5/16"
in width, 1" in height with .071" wall thickness.
|
|
D.
|
Drive
Belt shall be made of Dymetrol®1 and circulates
internally in the headrail to ensure smooth travel even if
track is curved. Curves shall be factory made according to
template or specification. |
|
E.
|
Carriers
are wheel mounted, and provided with rotating grommet or stationary
wheel carrier for pinch-pleat, ripplefold, or accordiafold
as specified. |
|
F. |
Wall/Ceiling
Brackets shall be made from formed steel with quick release
and allow for mounting of system either to wall or ceiling.
|
| 2.03
|
Controls:
|
|
A. |
The
switching device to activate the system shall be either a
BTX switch for hardwired control or the BTX radio or IR remote
control. Multiple systems shall be controlled either individually
or by BTX group controllers or automatic controllers including
sun sensors and programmable digital timers. Controls can
be integrated with home automation, or building management
systems. |
|
|
|
|
Part
3 - Execution
|
| 3.01 |
Inspection
and Preparation: |
|
A. |
Qualified
installer shall be responsible for window measurements prior
to installation, installation conditions, and preparation
of all mounting surfaces. |
|
B. |
The
power supplied shall be 110v or 220v AC three conductor to
the primary switch (hardwire switch, radio or IR receiver
unit, or BTX automated controls). Wiring between primary
switch and selected control units shall be in accordance with
manufacturer's wiring schematics and specifications. All on
site wiring shall be provided by the owner. |
| 3.02
|
Installation:
|
|
A.
|
System
installation shall be in accordance with BTX mounting instructions.
|
| 3.03 |
Maintenance:
|
|
A.
|
Traversing
system components should not require routine maintenance under
normal operating conditions. |
|
B.
|
For
fabric care refer to fabric manufacturer's care and use directions.
|
|
|
|
|
| 1Dymetrol® is
a registered trademark of Dymetrol Company, Inc. 724 Yorklyn
Road, Suite 280, Hockessin, DE 19707-8732. |
