| 1.01 |
Abstract:
|
|
A. |
Scope of work is to provide direct-drive traversing tracks for
draperies that may be curved to precise specifications for commercial
and/or residential applications that are operated by a BTX traverse
system along with, accessories, attachment hardware, and equipment
necessary to complete satisfactory installation. |
| 1.02 |
Submittals:
|
|
A. |
Manufacturing literature to describe assembly, materials, installation
instructions, and specific data. Include any pertinent wiring
diagrams. |
|
B. |
Shop
drawings are to include but are not limited to, all components,
fasteners, and installation methods. |
|
C. |
Window
systems are custom-built based on measurements taken in the
field. |
| 1.03 |
Quality
Assurance: |
|
A.
|
Manufacturer's
Qualification |
|
|
1.
BTX Window Automation is the original manufacturer of a unique
line of motorized headrail systems, electronic shading devices
and controls. |
|
B.
|
A qualified installer or sub-contractor shall perform installation. |
|
C.
|
Installation
shall conform to Local and National Building Code and any applicable
local standards. |
|
D. |
Sample
system may be provided upon Architect's request and BTX authorization.
|
| 1.04 |
Delivery,
Storage and Handling: |
|
A.
|
Systems
to be delivered to installation site or to installer intact
in original manufacturer's custom-built containers. |
|
B |
Systems
shall be operated under normal room temperature range, humidity,
and operating conditions. |
| 1.05 |
Warranty:
|
|
A. |
Provide
BTX standard limited warranty of five (5) years from date of
shipment against defects in materials and workmanship of motors
and hardware. Electronic and electrical controls are warranted
against defects in materials and workmanship for two (2) years
from date of shipment from the factory. |
Part
2 - Products
|
| 2.01 |
Manufacturer:
|
|
A. |
BTX
Window Automation
10827 Alder Circle
Dallas, TX 75238 USA
(800) 422-8839 |
| 2.02 |
Components:
|
|
A.
|
Motor shall be synchronous planetary drive with quick-connect
coupling for instant attachment to headrail. The 30-watt motor
shall be rated for up to 80 lbs. drapery weight and the 45 watt
motor shall be rated for up to 160 lbs. drapery weight. Tandem
Systems shall be rate for up to 160 lbs. at 30 bats and up to
280 lbs. at 45 watts. Motor shall operate at constant speed
regardless of load. Motor shall be 110v/60Hz or 220v/60Hz and
are UL and CSA recognized. Motors shall have shock resistant
motor coils and are moisture resistant and fire resistant. Motors
shall also have thermal protector for automatic switch off to
prevent overheating. Each motor shall be provided with precision
planetary gears and internal limit switches protected by a security
cover. The limit switches shall regulate the automatic switch
off upon completion of each running cycle. |
| |
B. |
Drive
Assembly and Return Assembly shall be manufactured from injection
molded plastic. |
|
C. |
Headrail shall be manufactured from extruded aluminum 1-5/16”
in width, 1” in height with .071” wall thickness. |
|
D.
|
Drive
Belt shall be made Dymetrol®1 and circulates internally in
the headrail to ensure smooth travel even if track is curved.
Curves shall be factory made according to template or specification.
|
|
E.
|
Carriers
are wheel mounted, and provided with rotating grommet or stationary
wheel carrier for pinch-pleat, ripplefold, or accordiafold as
specified. |
|
F. |
Wall/Ceiling
Brackets shall be made from formed steel with quick release
and allow for mounting of system either to wall or ceiling.
|
| 2.03 |
Controls:
|
|
A. |
The switching device to activate the system shall be either
a BTX switch for hardwired control or the BTX radio or IR remote
control. Multiple systems shall be controlled either individually
or by BTX group controllers or automatic controllers including
sun sensors and programmable digital timers. Controls can be
integrated with home automation, or building management systems.
|
Part
3 - Execution
|
| 3.01 |
Inspection
and Preparation: |
|
A. |
Qualified
installer shall be responsible for window measurements prior
to installation, installation conditions, and preparation of
all mounting surfaces. |
|
B. |
The
power supplied shall be 110v or 220v AC three conductor to the
primary switch. Wiring between primary switch (hardwire switch,
radio, or IR receiver unit, or BTX automate controls.) Wiring
between primary switch and selected control units shall be in
accordance with manufacturer’s wiring schematics and specifications.
All on site wiring shall be provided by the owner. |
| 3.02
|
Installation:
|
|
A.
|
System
installation shall be in accordance with BTX mounting instructions.
|
| 3.03 |
Maintenance:
|
|
A. |
Traversing
system components should not require routine maintenance under
normal operating conditions. |
|
B.
|
For
fabric care refer to fabric manufacturer's care and use directions.
|
| |
|
|
| |
